Verified Field Deployments

Global Heavy Industry Machine Installations

Explore real-world production performance, cycle time benchmarks, and cut quality verification across structural steel, pressure vessels, and pipe manufacturing facilities.

60kW Ground Rail Laser Cutter Shipyard Installation

Shipyard Heavy Plate | 60,000W

60kW Ground-Rail Cutter: 80mm Marine Steel

Delivered 24-meter continuous cutting bed for container vessel bulkheads. Replaced two plasma systems, reducing secondary bevel prep labor by 70%.

Cycle Speed: 1.4 m/min (80mm) Slag-Free Cut Edge

3-Chuck Heavy CNC Tube Cutter Construction Machinery

Heavy Tube Beveling | Φ400mm

Heavy Tube Laser: Crane Boom Profiling

3-chuck pneumatic system cutting high-strength square boom tubes. Achieved zero tailing scrap, saving over $42,000 annually in alloy steel waste.

Tailing Loss: 0 mm ±45° Single Pass Bevel

Laser Cladding Oilfield Mud Motor Rotor Remanufacturing

Oil & Gas | Inconel 625 Cladding

Laser Cladding: Mud Rotor Remanufacturing

Deposited tungsten carbide / Inconel CRA layer on drilling rotors. Reduced dilution to 2.4% and extended component field life in sour gas wells by 5x.

Dilution: <2.5% Life Extension: 500%

Send Your Technical CAD & Material for Free Sample Cutting

Verify edge taper, roughness (Ra < 6.3μm), and cut speed on your exact material grade before making any capital equipment commitment. We provide full CMM dimensional and metallurgical test reports.

Request Free Sample Testing (WhatsApp: +86 155 6620 6930)